Soft PVC extruder screw cylinders

• Specification

Screw diameter: Ø15-300MM   L/D:15-45
Barrel diameter:  Ø25-500MM      Length:300-1000MM


• Material

38CrMoAlA(JIS SACM645)
42CrMo(AISI 4140)

9Cr18MoV,stainless steel,etc


• Screw Design:

The screw should be single flighted,constant pitch,with the pitch equal to the diameter and the

length equal to 24 diameters.It should be bored for cooling.Screw Flights should be flamehardened.

The screw should be AISI4140 chrome plated.Since flexible PVC compounds can cover a wide range of

hardnesses,the screw design and dimensions are less critial than for rigid pvc.


Mixing pins and other types of mixing sections are often incorporated in a screw design to enhance dispersion,espeically when adding concentrates to a naturalbased compound.Screws with mixing

pins typically have 12-14 flights in the metering section.


Barrier screws are still another type of design that can be used for extruding flexible PVC.

• Parameter

Hard Chrome Plating treatment:

Thickness of Hard Chrome Plating Layer: 0.03-0.08mm

Hardness of Hard Chrome Plating Layer: ≥950HV

Grade	Material	Process
Standard grade	38CrMoAlA	Nitriding 96 hours
Bimetallic grade	38CrMoAlA	HP/HVOF
TC-A grade	Tungsten carbide 40%	Centrifugal casting
TC-B grade	Tungsten carbide 25%	Centrifugal casting
TC-C grade	Tungsten carbide 10%	Centrifugal casting

Our screw barrel are made by using advanced technology and equipment which provide various mechanical features such as strong ability, durability, exact fitting, etc. Our aim is focusing on customers requirement and create high quality products and technology.